IJKP-19: 4-Tire Air System / Air Locker Manifold Kit for Jeep JKU / JK

$315.95

2007-2018 Jeep JK Unlimited (4-Door) / 2007-2010 Jeep JK (2 Door) – All Models / Including RHD and LHD Drive

This kit is for those of you that want 4-tire inflation and the ability to run air lockers using an ARB Twin Compressor

Description

Compatibility

2007-2018 Jeep JK Unlimited (4-Door) / 2007-2010 Jeep JK (2 Door) – All Models / Including RHD and LHD Drive

NOTE: Some 2007 models may require trimming of the bracket.

See IJKP-19-ARB for a Package Deal with Compressor and Save $66!

Product Description

So you have made the choice to buy an ARB Twin Air Compressor and have converted your Jeep over to ARB Air Lockers.  And now you are left with the task of where to mount and plumb it for use with the air lockers and airing tires?

Innovative AT Products has taken all the guesswork out, and developed a complete 4-tire inflation and air locker solution for your Jeep JK!  And with the Air Down / Air Up Tool (included), you can deflate all 4 tires at once and air up all 4 tires at once to an adjustable set point (see IJKP-18 for additional details).

Features of the System

  • Tire inflation (and deflation) is even, consistent, and self-equalizes because all 4 tires are connected at once
  • Your ARB investment is safe from the elements and heat tucked neatly under the passenger seat.
  • The provided air locker manifold tucks in neatly next to the compressor and is mounted to the provided holes in the bracket
  • All air connections are inside the Jeep, so you do not have to open your hood, crawl under your vehicle, or clean dirt/mud/ice/snow off your air connections.  You can even close your doors “1-click” with the airlines connected for those cold and rainy days to stay warm and dry inside your Jeep while your tires inflate/deflate.
  • It is a “zero residual pressure” system.  Once you are done inflating your tires, the system returns to a neutral state.  There is no pressure in the system that would be subject to expansion and contraction due to changes in temperature / altitude.  That means less stress on components and seals.
  • Only one threaded connection in main supply.  That means no pipe tape, no pipe paste, or multiple threaded connections to deal with and less opportunity for leaks in the long run.
  • No typical bulky and restrictive air connections.  Our system uses simple, clean looking, and non-restrictive air connections.
  • Each air line is 10ft long so you can easily reach your tires or that other vehicle that needs air (because there is always one!)

JK Specific Mounting Brackets

The mounting bracket has been specifically designed for mounting an ARB Twin Air Compressor and Air Locker Manifold in your Jeep JK under the passenger seat away from all the elements.  The bracket mounts to the stationary part of the seat frame and does not interfere or limit any of the seat movement (the same is the case for the seat brackets for the air connections).  All the mounting brackets are laser cut and CNC bent aluminum to exact specifications and black textured powder coated for a clean, long lasting finish.

The Air Line System

It is a simple plug and play system.  All you have to do is connect the 2 Y-Connectors on each side of the Jeep, clip on the air chucks, and turn on the compressor.  Typical inflation times for all 4 tires at once from 10-30psi at sea level are:
33’s – 4 min
35’s – 5 min
37’s – 7 min
40’s – 10 min
44’s – 12 min

Kit Contents

It’s not just a box of parts, its a well thought out plan!  The kit includes everything you need to mount / connect the ARB compressor and inflate your tires on your Jeep JK.  The instructions provide step-by-step details to install the brackets, compressor, plumbing, and wiring (including Jeep JK specific connections).  Unlike other systems in a box, there is no guesswork or trying to figure out where everything goes, what length to make each line, etc.  Everything is already done for you!  Each kit contains:

  • 1 Bracket for ARB Compressor
  • 2 Brackets for Air Connections
  • 1 Air Locker Manifold Assembly
  • All Bolts / Nuts
  • All Fittings
  • All Pre-Cut Tubing for Air Supply
  • 4 Air Lines (10 ft each) with Connectors, 4 Haltec Air Chucks (not shown in pictures), and Custom Storage Bag
  • All Wiring Terminals / Connectors
  • Step-by-Step Installation Instructions with Color Photos
    • Includes Jeep JK specific details for connecting wires from ARB harness
    • Also includes specific wiring details if using an sPOD or equivalent
  • Air Down / Air Up Tool

What you will have to Supply Separately

  • ARB Twin Compressor (CKMTA12) sold separately – See IJKP-19-ARB for a Package Deal with Compressor and Save $25!
  • ARB Lockers must be purchased separately
  • A mounting solution for the ARB supplied compressor and air locker switches.  Some options include:
    • Daystar makes a Switch Panel:  Part #KJ71040BK (07-10) / Part #KJ71034BK (11-18)
    • Daystar makes a Pillar Switch Pod:  Part #KJ71043BK (07-10) / Part #KJ71055BK (07-17)
    • Rugged Ridge makes a Lower Console Switch Panel:  Part #17235.55 (07-10) / Part #17235.54 (11-18)
    • Rugged Ridge makes an A-Pillar Switch Pod:  Part #17235.56 (07-10) / Part #17235.58 (11-18)
    • Or simply cut openings in console or dash for the switches or use an sPOD or equivalent

Notes:

If you plan to use with RHD, install under drivers seat, or have a lock box under seat please specify when ordering.

Additional information

Weight5.9 lbs
Dimensions14 × 12 × 4 in

Instructions

IJKP-19 Installation Instructions

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.